Everyone loves smartTalk
wireless technology.

Engine faults, low fuel, or failure to maintain remote thermostat set points are just a few of the factory installed SmartTalk presets. Knowledge is power and SmartTalk lets you take the focus off of winter, and back onto delivering the project on time and on a budget!

The result: Peace of mind for both you and your team that even when Mother Nature shows her cold side, the heat will be on.

The Power of SmartTalk

Straight from the Field

Engine Derates Due to Excessive Idling 

Downtime, delays, and expensive manpower to clear the fault… Lost revenue, lost margin, and most importantly, lost confidence in your company.

SmartTalk identifies the condition BEFORE it derates and automatically applies the load to clear the fault.

Engine Throws a Code

Nobody knows what the problem is so after some trial and error a technician with the diagnostic program is called to decipher the code and reset the engine. Resulting in extended downtime, added costs, and an unnecessary headache.
SmartTalk records the code and cross-references the detailed engine service manual. Then if it can’t resolve the condition itself, it automatically displays the most likely causes and immediate steps for the user to resolve the code.

Unit Runs Out of Fuel and Now it won’t prime

The engine is starved of fuel and contaminants on the bottom of the tank are sucked into the fuel system. The unit either needs to be repaired or replaced.

SmartTalk notifies the user before the fuel levels are critically low, and again when the fuel is critically low. If the unit is not fueled it automatically initiates a
structured shut down to prevent the engine from being starved of fuel.

Engine Debates Due to Excessive Idling 

Unit fails and it is down for an extended period
of time before anyone notices:

  • Customer calls angry and wants a new unit.

  • Your tech identifies the problem as bad fuel & the customer tells you everything else works just fine.

  • You credit the customer and hope it doesn’t happen again.

Before performance is affected SmartTalk senses restriction in the fuel filtration and recommends a fuel filter replacement. The user locates the onboard spare filter and maintains 100% uptime.

Unit is left unplugged and now it won’t start 

  • Try boosting the unit, or heating the fuel.

  • Try charging the battery and heating the unit with another unit.

  • Tow the heater to a heated shop overnight and replace the battery and or fuel filter.

  • In place of meeting your construction site needs you waste precious time and energy on getting your heater to work.

SmartTalk Arctic Start is activated to prevent the unit from ever freezing up. It automatically monitors the battery voltage and engine block temperature and starts the unit as required. BASECAMP can be left alone in the frozen tundra for over 1 month with no risk of the unit not starting.

Why choose the hard way when you can have an easy button?

Start-up a heater and check it twice a day to make sure it is still running. Adjust the temperature 4 times a day and still never seem to get the temperature right. You’re either overheating
and burning costly fuel, or risking the quality of your work. When it gets really cold you can’t even sleep because you can’t afford a freeze-up. Wouldn’t it be nice to know that someone has your back?

Place a SmartProbe in the location requiring heat, set the desired temperature, and walk away. If you don’t hear from SmartTalk, your mission is accomplished… as cost-effectively as possible.

Save Operational costs and confusion of Fueling, Maintaining, and Servicing

You can have full-time staff, fueling every 12-24 hours,
servicing every 250-500 hours, and available for repairs daily.

  • Customer calls angry and wants a new unit.

  • Your tech identifies the problem as bad fuel & the customer tells you everything else works just fine.

  • You credit the customer and hope it doesn’t happen again.

If SmartTalk detects a system anomaly, before performance
is affected it works to independently resolve the issue. If the condition persists it will ask for assistance. SmartTalk will always notify you if it requires fuel or service, so you can stay focused on your most important work.


SmartTalk records and reports all operating data including fuel efficiency and SmartProbe temperature logs. If your customer wants proof that you are doing the best possible job…now you can prove it!

Book A Demo Today!

1 (855) 554-4344